Skip to content
Miller Syncrowave 350 LX TIG Welder Package (951623)
The Syncrowave 350 is no longer available. The suggested replacement is the Syncrowave 400 (951831).
The Miller Syncrowave 350 LX TIG Welder Package provides a stable low-end output for intricate applications and the capability to ensure you have enough power for those heavy demands.
Squarewave technology
Squarewave technology was developed by Miller Electric in 1976 to improve your weld quality and make TIG welding easier. Miller Squarewave technology provides arc stability when welding aluminum, prevents arc rectification and eliminates tungsten erosion.
Syncro Start
This allows the choice of Soft, Standard or Hot TIG starts based on the application, lead lengths and tungsten size.
Last procedure recall
Simplifies changing your Syncrowave back and forth from aluminum TIG to stainless TIG to Stick welding. One switch makes all the control panel changes.
Pulsed TIG control
This control lowers the heat input into the part and reduces warping and distortion.
Balance control
The balance control is adjustable to provide additional oxide removal (more cleaning) or lesscleaning based on the condition of the material being welded.
Digital welding meters
Display both amperage and voltage for viewing of the actual and preset values for greater accuracy and repeatability in your welding procedure.
Adaptive Hot Start
Stick welding features such as Adaptive Hot Start™ provide good arc strikes without sticking. Once welding, the DIG control makes dynamic adjustments to the welder to ensure smooth E7018 and deep penetration E6010.
Comes complete with:
• Syncrowave 350 LX power source
• No. 37 Running Gear
• Coolmate 3X Cooler
• Coolant (4 gallons)
• RFCS-14 remote foot control
• 15 ft (4.6 m) work lead with clamp and Dinse connector
• Gas hose
• Regulator/flowmeter
• Cable cover
25 ft (7.6 m) W-375 Weldcraft Super Cool TIG Torch (water-cooled)
• Sheilding cups
• Collets-1/16, 3/32, 1/8
• Collet Bodies-1/16, 3/32, 1/8
• 2% Cerium Tungsten-1/16, 3/32, 1/8
The Miller Syncrowave 350 LX TIG Welder Package provides a stable low-end output for intricate applications and the capability to ensure you have enough power for those heavy demands.
Squarewave technology
Squarewave technology was developed by Miller Electric in 1976 to improve your weld quality and make TIG welding easier. Miller Squarewave technology provides arc stability when welding aluminum, prevents arc rectification and eliminates tungsten erosion.
Syncro Start
This allows the choice of Soft, Standard or Hot TIG starts based on the application, lead lengths and tungsten size.
Last procedure recall
Simplifies changing your Syncrowave back and forth from aluminum TIG to stainless TIG to Stick welding. One switch makes all the control panel changes.
Pulsed TIG control
This control lowers the heat input into the part and reduces warping and distortion.
Balance control
The balance control is adjustable to provide additional oxide removal (more cleaning) or lesscleaning based on the condition of the material being welded.
Digital welding meters
Display both amperage and voltage for viewing of the actual and preset values for greater accuracy and repeatability in your welding procedure.
Adaptive Hot Start
Stick welding features such as Adaptive Hot Start™ provide good arc strikes without sticking. Once welding, the DIG control makes dynamic adjustments to the welder to ensure smooth E7018 and deep penetration E6010.
Comes complete with:
• Syncrowave 350 LX power source
• No. 37 Running Gear
• Coolmate 3X Cooler
• Coolant (4 gallons)
• RFCS-14 remote foot control
• 15 ft (4.6 m) work lead with clamp and Dinse connector
• Gas hose
• Regulator/flowmeter
• Cable cover
25 ft (7.6 m) W-375 Weldcraft Super Cool TIG Torch (water-cooled)
• Sheilding cups
• Collets-1/16, 3/32, 1/8
• Collet Bodies-1/16, 3/32, 1/8
• 2% Cerium Tungsten-1/16, 3/32, 1/8
MPN: MIL951623
UPC: 715959389563
Phase: Single Phase
