Steelmax M2AL HSS Annular Cutter 2" Depth (SM-AC-XXXXX-2)

In stock
As low as $36.99 was $44.00
warning WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Steelmax offers some of the best quality high speed steel (HSS) annular cutters for all of your hole-making needs. All Steelmax annular cutters have standard Weldon shanks of 3/4" for cutters up to 2-3/8" and 1-1/4" shank for cutter diameters above 2-3/8". As a result, Steelmax cutters will fit and improve the performance of any mag drill.

All Steelmax cutters ship with a pilot pin installed at no extra charge.

Annular Cutter Advantages Over Twist Drills
• Eliminates costly and time consuming step-drilling
• Significantly less drilling time (3-4 times faster)
• Longer tool life (5-10 times more holes per cutter)
• More accurate and higher quality holes
• Easily drill on curved surfaces like pipe and tubing
• Create overlapping holes

Steelmax HSS cutters utilize an M2AL (aluminum additive) formulation which increases cutter life due to better heat propagation characteristics and is less brittle compared to those using a cobalt additive. HSS cutters are most cost effective for mild steel applications and holes up to 2-3/8" in diameter in material up to 2" thick. HSS cutters can also be re-sharpened to extend cutter life.

Steelmax high-performance cutting fluid should be used with all annular cutters for optimal cutting performance and to extend cutter life. The Steelmax brand cutting fluid is a water-based cutting fluid that is bio-degradeable and does not require time-consuming cleanup prior to welding or assembling parts.
More Information
Brand Steelmax
SKU ISMT20170015
Prop65 Yes
Manufacturer's Warranty Yes
Discontinued Product No
Copyright © 2022 Weld My Ride. All Rights Reserved.